elephant ear plant soft stem Elephant Ear
SKU: 11668247652
elephant ear plant soft stem

elephant ear plant soft stem Elephant Ear

$19.48 $21.65
Save 10%
No.2 Bestseller on pssmge.org >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 7 - Jul 12

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

elephant ear plant soft stem Elephant EarPRESALE Spring 2026 Shipping Schedule: 3 20 2026 Nothing screams tropical in the summer garden than the magnificent Elephant Ear! These beloved, easy to grow tubers produce the most dramatic, exotic foliage summer to fall. There are two main types of Elephant Ears Alocasia (upward pointing, glossy leaves) and Colocasia (tall stems with velvety leaves that hang similar to elephants's ears). Elephant Ears range in color, height, pattern and texture.

PRESALE

Spring 2026 Shipping Schedule: 3/20/2026

Nothing screams tropical in the summer garden than the magnificent Elephant Ear! These beloved, easy to grow tubers produce the most dramatic, exotic foliage summer to fall. There are two main types of Elephant Ears - Alocasia (upward pointing, glossy leaves) and Colocasia (tall stems with velvety leaves that hang similar to elephants's ears). Elephant Ears range in color, height, pattern and texture. Colocasia esculenta is grown in Hawaii for food and is commonly known as taro.

About this Variety

What sets this Elephant Ear Black Stem Upright apart from the others are its chartreuse-yellow leaves with dark, blackish stems that give this variety its name.

Highlights

  • Exotic, tropical foliage
  • Grows well in containers
  • Foliage summer through fall
  • Thrives in moist areas, including standing water
  • Easy to grow

Exposure:

Full sun to partial shade

Blooms:

Foliage Summer to Fall

Height:

Grows 36-72" tall

Spacing/Depth:

Plant 18-24" apart, 2-4" deep

USDA Zones:

Grow as Perennial in zones 8-10, Grow as Annual elsewhere.

Growing Instructions

Plant Elephant Ears outdoors in the spring after all danger of frost has passed. Elephant Ears thrive in a full sun to partially shaded spot in moist, rich soil. Elephant Ears will tolerate full sun but prefer to have a little shade. Plant tubers 2-4" deep and 18-24" apart. When planting a large number of bulbs in one bed, excavate the entire area to the recommended depth, work fertilizer into the bottom of the trench, set out bulbs and then cover all at once. Water thoroughly at planting. While actively growing, water frequently and thoroughly so that water will reach roots. Mulch to keep the soil cool and to prevent the soil from drying out. Fertilize at planting and during growing season every two to three weeks. In areas where Elephant Ears are not winter hardy, dig up tubers in fall before frost. Clean off roots and store at 50ºF. Replant tubers in spring after all danger of frost has passed.

Care Tip

Elephant Ears are suitable for large pots, raised beds and will grow in standing water. Water well during dry periods. Some varieties of Elephant Ears can be grown indoors in a very bright location in consistently moist soil.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 11668247652

Discover Niche Categories That Outsell elephant ear plant soft stem

Top-Converting Item to Boost Your Average Order

4.8 ★★★★★
Based on 2499 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
A
Verified Purchase
Amazonian
Draper, US
★★★★★ 4
Good product, expensive price, poor adhesive
Premium packaging for a premium device. Useful for IR remote signal delivery with extra functions on the side. Price though is luxury for it’s use. Used this for a Logitech Harmony hub control of an non-smart electric fireplace. Setup is a breeze but only if you’re tech savvy. Highly recommend to watch the YouTube video for information on all it’s application. There a many other cheaper devices similar to this available on Amazon that I could have used for the same application. If you have a need for multiple control within the same vicinity of other devices, this may be more useful for you. However, if you plan on utilizing an IR repeater/extender for only a single device and would like to save some money, don’t buy this one. This device works quite well though. Have had no issues achieving the effect needed. Only four stars due to the poor adhesive on the emitter attachment. As stated earlier, I used this on an electric fireplace with a glass surface. I used the attachable emitter to the front glass sensor where the IR receiver was located on the fireplace. After only one day, the emitter attachment fell off even though I made sure the glass was thoroughly cleaned prior to adhering it. Otherwise a good product.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 8, 2019
J
Verified Purchase
James P. Karl
Boise, US
★★★★★ 5
Denon avr ir remote port works great with sewell products
I bought a new entertainment center with glass doors and wasn't getting good signal range with the door closed. Plus i couldnt get a good of line site, since this cabinet was shorter than the orginal, and the location for my avr was further to the left than before and now my line of sight to the receiver was blocked from other parts of the room due to high couch back. I tried a couple different cheap $10 devices that used stick on transmitters/receiver buttons but they were clumsy and didn't provide me a total solution for my room layout. Works fantastic with a denon x1800 receiver (and many other models). It works directly with the denon's ir remote port in the back of the avr port. The solution is actually quite simple. Plug a stereo 3.5 mm male to male plug in the denon ir port in the back of the avr and and the other end to the orange emitter box(puck). The pics are about the size of an oreo double stuff cookie Tuck the orange box/puck away whereever and plug the power in. The box doesn't need to seen or be pointed towards anything. It's location is only limited by the length of your stereo cable and access to AC power Put the blue box puck anywhere in the room where you have general line of sight to it from where you will be using your remote, and plug power in. In my case, its sitting on top of one of my tower speakers. From there it clears the back of the couch and can see from the family room, eat-in kitchen area, and the kitchen beyond. Done. I didn't need or use any of the included emitter or transmitter cables, though if you dont have a denon, or other brand avr with an ir port to plug into , or also want to hide the blue puck ( in which case attach the included sensor cable), you'll need them. But for denon users with an ir port, you just use the two pucks and their usb power adapters. Simple.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 17, 2026
T
Verified Purchase
Tjaltz316
Phoenix, US
★★★★★ 1
Worked good then died at six months (Updated)
Worked good for a couple of months, then started to develop a lag between when you pressed a button on the remote, and when the TV would respond. If I moved the speaker blocking the TV’s IR receiver, and pointed the remote at it, it worked perfectly. Add the IR blaster back in and the delay returns. The delay kept getting longer and longer, sometimes 5 to 10 seconds. Then it just died. Would not pass any IR signals, even though the receiver and emitter both had power. Tried rebooting, changing communication channels to no avail. Out of Amazon return window. Manufacturer wants you do go through a troubleshooting process for warranty that is too complicated and time consuming. Customer Service Rep at Sewell send me a warranty replacement.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 21, 2025
J
Verified Purchase
Jack & Ann Kenny
New York, US
★★★★★ 5
Nice Product and Customer Service
I ordered this BlastIR Wireless Pro IR Repeater from Sewell to replace a wired version of an IR repeater from another company. We have moved our TV on to a wall location and are in the process of hiding all the wiring out of sight behind walls and/or in a cabinet. We still have some wires to go, but this product has enabled us to eliminate the IR wiring all together. It's a real improvement in both looks and performance over the cheaper, wired version we originally tried. The BlasterIR's Receiver is the component that faces the room and receives the IR signal from our remote controls. It's small enough to fit in the space between our sound bar and the bottom of the TV. It's range is great for our room size (about 22' long and 18' wide) and picks up the remotes signal from a side angle that's almost parallel to the TV itself. The receiver is powered through one of the USB ports integrated into the TV (although the device itself supports either a USB or regular plug-in option). I haven't used them yet but Sewell appears to have provided a few options to help with affixing the IR devices in their final positions including some adhesive pads and a magnetic pad option as well. I'm still playing around with the permanent placement of the IR Blaster Emitter. It sits inside a closed cabinet and faces the concealed cable box receiver, router and DVR components. It retransmits the various IR signals it receives from the IR receiver by blasting that signal to anything it faces. I just placed it in the cabinet about 5" away from the devices I wanted to control, plugged it in and it worked with no other set up. So far the BlastIR is working seamlessly and with much better function response time than the cheaper IR version we'd tried at first. The lag time between when a button is pressed on the remote control and the action taking place on the device I'm communicating with is minimal. The emitter itself is plugged into an outlet on a surge protector powering the other in-cabinet devices, although it too could be powered via the provided USB connection if desired. As a note, we did experience a shipping issue during our ordering process. The order it self was processed quickly and shipped in a timely manner. However, there was an issue with our actual receipt of the product and the USPS who reported it delivered to our mailbox when in fact it had not been. Regardless, we reached out to Sewell directly and they quickly resolved the issue for us with no problems and in a timely manner. I would recommend both this IR Blaster Pro product as well as Sewell as a trusted company itself.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 8, 2021
S
Verified Purchase
Scott C
Cuba, US
★★★★★ 3
Does NOT Transmit Through Walls
Quick and easy setup! Works great within the room. However, will not work effectively between walls (i.e. - AV closet to living room).
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 8, 2026

recommand products

Edgy White Aglaonema in Tubular Matte Terracotta
29.62
Aglaonema Snow White
20.00
Aglaonema Red Legacy
22.25
Aglaonema 'Snow White'
22.10
Aglaonema White Mayang
29.32